Filter
Top Products
HX600SPage 12
4.1.4 USING THE CD-36 CHARGER CRADLE
1. Turn the transceiver off.
2. Insert the DC plug from the NC-90 into the DC jack on the CD-36 side
panel, then plug the NC-90 into the AC line outlet.
3. Insert the HX600S (with the battery pack) into the CD-36; the antenna should
be at the left side when viewing the charger from the front.
4. If the HX600S is inserted correctly, the Red indicator on the CD-36 will
glow. A fully-discharged pack will be charged completely in approximately 8
hours.
Important Note:
Do not leave the charger connected to the transceiver for continuous
periods in excess of 24 hours. Long term overcharging can degrade the
Lithium-Ion battery pack and significantly shorten its useful life.
5. When charging is completed, disconnect the pack from the CD-36, and
unplug the NC-90 from the AC line outlet.
4.1.5 MOUNTING THE CD-36 ON THE VESSEL
The CD-36 is designed to be surface
on a vessel which can be connected to
the charger and a GPS that supplies NMEA data for DSC Distress transmis-
sions.
If mounting on a vessel, the CD-36 must be mounted in a location on the ves-
sel that is directly shielded from rain or splashes of water. After the location is
found, mount the CD-36 using the supplied mounting screws.
CD-36 Desktop Mount