Filter
Top Products
HX600S Page 33
10. MENU
(
“SET”
)
MODE
The Menu Mode allows a number of the HX600S operating parameters to be
customized.
1. Turn the transceiver off.
2. Hold down the SQL switch, then turn on the transceiver while still holding
down the SQL switch.
3. “
SEtSEt
SEtSEt
SEt” will appear on the display, indicating that the Setup Mode has been
activated.
4. Press the the SQL switch to select the Menu item to be adjusted.
5. Press the [S] or [T] key to select the status or value of the Menu item.
6. After completing your adjustment, press the SQL switch to save the new
setting, and then press the PTT switch to exit to normal operation.
bEPbEP
bEPbEP
bEP (KEY BEEP)
Function: Enable/Disable the Keypad beep.
Available Values: ON / OFF
Default: ON
CHFCHF
CHFCHF
CHF (CHANNEL FREQUENCY)
Function: Enable/Disable the Channel Frequency display.
Available Values: ON / OFF
Default: OFF
CHnCHn
CHnCHn
CHn (CH NAME SET)
Function: Changes the channel name shown on the display.
1. Select the channel on which you wish to change the name before recall-
ing this Menu item.
2. Turn the transceiver off.
3. Hold down the SQL switch, then turn on the transceiver while still holding
down the SQL switch.
4. “
SEtSEt
SEtSEt
SEt” will appear on the display, indicating that the Setup Mode has been
activated.
5. Press the SQL switch to select this Menu item “
CHnCHn
CHnCHn
CHn”.
6. Press the [S] or [T] key to select the first character (letter, number, or
symbol) in the name you wish to change, then press the [MEM] key to
move to the next character.
7. If you make a mistake, press the [H/L] key to move back, and then reselect
the correct letter, number, or symbol.
8. Repeat step 6 as many times as necessary to complete the name tag (up