Filter
Top Products
HX600S Page 13
4.2 CONNECTING A GPS TO THE CD-36
The CD-36 is supplied with a cable that is designed to be connected to any
GPS that has an NMEA Output with the GLL, GGA, GNS, or RMC sen-
tences. Check with the owner’s manual of the GPS to confirm this informa-
tion. The NMEA input cable on the CD-36 contains two wires, uses are shown
below.
Blue – NMEA Input (Connects to NMEA Out of GPS)
Green – NMEA Negative (Connects to NMEA Negative or battery Ground of
GPS)
If you have further inquires, please feel free to contact us at:
Phone: (800) 767-2450
Fax: (888) 679-8046
Web site: standardhorizon.com
Email:
marinetech@vxstdusa.com
To connect the GPS receiver, connect the wires between the CD-36 and the
GPS. Insure that the wires are properly shielded from water. See the figure
at the right for example of connection to STANDARD HORIZON GPS CHART
PLOTTER.
Green
Blue
Green
Brown
16/9
WX
H/L
SUBMERSIBLE