Filter
Top Products
HX600SPage 36
1. Visit http://www.nws.noaa.gov/nwr/indexnw.htm and choose the SAME code
in the state and county of the coverage area.
Example:
COUNTY/CITY/AREA SAME # NWR TRANSMITTER FREQ. CALL SIGN WATTS REMARKS
Los Angeles 006037 Los Angeles, CA 162.55 KWO37 300
2. Turn the transceiver off.
3. Press and hold the SQL switch, then press and hold the POWER switch
until the display turns on and shows “
SEtSEt
SEtSEt
SEt.”
4. Press the SQL switch until “
nA1nA1
nA1nA1
nA1” is shown.
5. Press the [S] or [T] key to select the digit in the SAME code; press the
[MEM] key to set the number and step to the next position.
6. Repeat step 5 until all numbers are programmed. If you make a mistake,
press the [H/L] key to move back to the digit and repeat step 5.
7. After completing your adjustment, press the SQL switch to save the new
setting.
8. Press the PTT key to exit to normal operation.