Filter
Top Products
1-4
AS1021M-T2/1021M-82 User's Manual
SATA/SCSI Subsystem
The SC815TQ+-560/SC815S+-560 chassis was designed to support four SATA
(1021M-T2) or SCSI (1021M-82) hard drives, which are hot-swappable units. Note:
The operating system you use must have RAID support to enable the hot-swap
capability of the SATA/SCSI drives.
PCI Expansion Slots
One standard size and one low-profi le PCI-X/PCI-E add-on card may be used with
the SC815TQ+-560/SC815S+-560 chassis.
Control Panel
The control panel on the SC815TQ+-560/SC815S+-560 provides you with system
monitoring and control. LEDs indicate system power, HDD activity, network activity
(2) and overheat/fan failure. A main power button and system reset button is also
included.
I/O Backplane
The SC815TQ+-560/SC815S+-560 is an ATX form factor chassis that is designed
to be used in a 1U rackmount confi guration. Ports on the I/O backplane include
one COM port, a VGA port, two USB 2.0 ports, PS/2 mouse and keyboard ports
and two gigabit Ethernet ports.
Cooling System
The SC815TQ+-560/SC815S+-560 chassis has an innovative cooling design that
features fi ve sets of 40-mm counter-rotating fans located in the middle section of the
chassis. There is a "Fan Speed Control Mode" setting in BIOS that allows chassis
fan speed to be determined by system temperature. The power supply module
also includes a cooling fan.