Filter
Top Products
5-12
AS1021M-T2/1021M-82 User's Manual
H8DMR-82/H8DMR-i2 Quick Reference
Jumpers Description Default Setting
J3P 3rd Power Fail Detect En/Dis Closed (Enabled)
JBT1 CMOS Clear See Section 5-9
JCF1 Compact Flash Master/Slave Closed (Master)
JI
2
C1/2 I
2
C to PCI Enable/Disable Closed (Enabled)
JPA1* SCSI Enable/Disable Pins 1-2 (Enabled)
JPA2/JPA3* SCSI Channel A/B Term. Open (Enabled)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPX1A PCI-X Slot #6 Freq. Select Open (Auto)
JPX1B PCI-X Slots #7 Freq. Select Open (Auto)
JWD Watch Dog Pins 1-2 (Reset)
Connectors Description
COM1, COM2 COM1/COM2 Serial Port/Header
FAN 1-5 System Fan Headers
IPMB System Management Bus Header
J32 4-pin Auxiliary Power Connector
JA1* U320 SCSI Channel A Connector
JAR 3rd Power Supply Alarm Reset Header
JB1* U320 SCSI Channel B Connector
JD1 Onboard Speaker/Keylock/Power LED
JF1 Front Panel Connector
JFDD1 Floppy Disk Drive Connector
JIDE1 IDE Drive Connector
JL1 Chassis Intrusion Header
JOH1 Overheat Warning Header
JPW1 20-Pin ATX Power Connector
JPW2 8-Pin Processor Power Connector
JPWF Power Fail Header
JWF1 Compact Flash Card Power Connector
JWOL Wake-On-LAN Header
JWOR Wake-On-Ring Header
LAN1/2 Gigabit Ethernet (RJ45) Ports
PWR I
2
C Power Supply I
2
C Header
SATA0 ~ SATA5 Serial ATA Ports
SGPIO1/SGPIO2 SGPIO Headers
SIM1U IPMI Card Slot
USB0/1 Universal Serial Bus (USB) Ports 0/1
USB2/3 Additional USB Headers
*H8DMR-82 only