Suunto SS109544000 Scuba Diving Equipment User Manual


 
20
3. DIVING WITH THE ZOOP
This section contains instructions on how to operate the dive computer and interpret
its displays. You will nd that this dive computer is easy to use and read. Each display
shows only the data relevant to that specic diving situation.
3.1. BEFORE DIVING
3.1.1. Activation and Prechecks
The dive computer will activate if submerged deeper than 0.5 m (1.5 ft). However, it is
necessary to turn on the Dive Mode before diving to check the altitude and personal
adjustment settings, battery condition, oxygen settings etc. Press the SMART (Mode)
button to activate the instrument.
After activation all display elements will turn on showing mostly gure 8’s and graphical
elements (Fig. 3.1.). A few seconds later the battery power indicator is shown and the
buzzer is activated (Fig. 3.2. display a, b, c or d depending on the battery voltage). If
set to Air mode the screen will enter the Surface mode (Fig. 3.3.) and if set to Nitrox
mode the essential oxygen parameters are shown with the text NITROX (Fig. 3.20.)
before the Surface mode.