Filter
Top Products
30
3.3.1. Basic Dive Data
The dive computer will remain in the Surface mode at depths less than 1.2 m [4 feet].
At depths greater than 1.2 m the instrument will go into the Diving mode (Fig. 3.6.).
º
C
TIME
DIVE
m
NO DEC TIME
T
C
B
MAX
Fig. 3.6. Dive starts.
All information on the display is labeled (Fig. 3.6). During a no-decompression stop
dive, the following information will be displayed:
• your present depth in meters [ft]
• the maximum depth during this dive in meters [ft], indicated as MAX
• the available no-decompression time in minutes in the center window as NO DEC
TIME and as a bar graph on the left side of the display. It is calculated based on
the ve factors described in section 6.1. “Operating Principles”.
• the water in temperature in °C [°F] in the lower left corner
• the elapsed dive time in minutes, shown as DIVE TIME in the lower right corner