Filter
Top Products
68
To enter the Data Transfer select MODE- 1 MEMORY- 3 PC - SET (Fig.4.14)
The data transfer is carried out using the connector on the bottom of the unit.
The following data is transferred to the PC:
• depth prole of the dive
• dive time
• surface interval time
• dive number
• Altitude and Personal adjustment settings
• oxygen percentage setting and maximum OLF (in NITROX Mode)
• tissue calculation data
• temperature at the maximum depth, beginning of the dive, and end of the dive
• dive entry time (year, month, day and time)
• additional dive information (e.g. SLOW and Mandatory Safety Stop violations,
Dive Attention Mark, Bookmark, Surfaced Mark, Decompression Mark, Ceiling
Error Mark)
• identity number of the dive computer
• personal information.
It is also possible to manually add comments and other personal information to the PC
based dive data les. The PC-Interface package comes complete with the interface
unit, the software, and an instruction and getting started guide.