Suunto SS109544000 Scuba Diving Equipment User Manual


  Open as PDF
of 108
 
79
CAUTION Whenthebatteryischangedallnitrogenandoxygenuptakedata
islost.Therefore,theno-yingtimeshownbythecomputershould
havereachedzerooryoumustwaitfor48hoursorpreferablyeven
100hoursbetweendivesbeforeyoumaydiveagain.
All history and prole data, as well as the altitude, personal and alarm settings, will
remain in the dive computer memory after the battery change. However, the clock
time and time alarm setting is lost. In the NITROX Mode the Nitrox settings are also
reverted back to default settings (21 % O
2
, 1.4 bar PO
2
).
When working with the battery compartment, cleanliness is extremely important. Even
the smallest dirt particles may cause a leakage when you dive.
BATTERY KIT
The battery kit includes a 3.0 V coin type lithium cell battery and a lubricated O-ring.
When handling the battery do not make contact with both of the poles at the same
time. Do not touch the surfaces of the battery with your bare ngers.
TOOLS REQUIRED
• A at 1.5 mm screwdriver or a special tool for spring bars (K5857).
• Soft cloth for cleaning.
• Needlenose pliers or large screwdriver for turning securing ring.
 previous next