Filter
Top Products
User’s Manual B-7
Display Controller and Modes
■ The way to move to multi-monitor Intel
®
965 Express
■ Switch to Display Properties, like shown in previous page.
■ Click Advanced in Display Properties and choose Intel Graphics
Media Accelerator Driver for Mobile.
■ Click the Graphic Properties... button.
■ Select Display Devices tab in (Multiple Monitors) and Intel 965
®
Express Properties.
■ With external monitor connected, choose the options under Multiple
Display, then select OK.
2. In some cases DVD video playback images may not be displayed when
the display of the computer and a CRT display are used at the same.
Reduce the resolution, use the display of the computer only, use the
CRT display only or set display device in the multi-monitor, then play
DVD.
■ Please refer to External monitor in Chapter 8, Optional Devices, or
the application guide for the setting of each display device.
3. The DVD video overlay is not displayed when the display mode of CRT
display is set to high resolution and high refresh rate mode.
Please decrease the resolution and refresh rate of CRT display.
4. When the display mode is simultaneous LCD (internal liquid crystal
display) and the system goes into Standby Mode or Hibernation Mode,
you can switch to the LCD (internal liquid crystal display) display mode
by pressing Fn + F5. Under this environment, however, you may not
return to the simultaneous LCD (internal liquid crystal display) display
mode.
In these cases, perform the following steps:
In the Intel 965
®
Express Series Properties, choose the options you
want to use.
Display Properties
(Multiple Monitors) and Intel
®
965
Express Series Properties