Filter
Top Products
10 XPower Inverter 1000 Owner’s Guide
Inverter Installation
6. Attach the other end of the negative DC input cable to the negative
terminal of the battery.
If you have installed a battery selector switch, set it to Off when
making the connection to prevent sparking.
NOTE: This the last cable connection. A spark is normal when you
make this connection to the battery without a battery selector switch.
If you have installed a battery selector switch, use it to select one of the
batteries or battery banks (house bank preferred over start bank).
7. Move the inverter’s O
N/OFF switch to the On position.
The Power light should illuminate, indicating that the inverter is ready
for operation.