Filter
Top Products
1–6 445-0167-01-01
Optional Accessory: Remote Switch
An optional remote switch can be plugged into the remote switch jack at
the back of the RS400. It lets you switch the RS400 from on to standby
from a convenient location—up to 25 feet (7.5 m) away from the inverter
(using the cable supplied with the switch).
Dimensions of Remote Switch
Part number of Remote Switch
To purchase a remote switch, please contact Customer Service for a
referral to a distributor. Please provide the part number 808-2400. See
page ii for contact information.
Instructions for installing and using the remote switch are included in the
remote switch package and the RS400 Sine Wave Inverter Installation
Guide.
Height
2.5 inches (63.5 mm)
Width
2 inches (50.8 mm)
Depth
1.1 inches (28.3 mm)
Cable length
25 feet (7.5 m)
Note: The remote switch jack at the back of the RS400 may not be
accessible once the inverter has been mounted.
If you intend to use the remote switch with an RS400 that has already
been installed, consult a qualified service technician before installing
and connecting the remote switch.