Filter
Top Products
Safety
vi 445-0167-01-01
4. To reduce the risk of electrical shock, disconnect both AC and DC
power from the inverter before working on any circuits connected to
the inverter. Turning the On/Standby switch to Standby ( ) will not
reduce this risk.
5. Protect the inverter from rain, snow, spray, and water.
6. To reduce the risk of overheating, keep the ventilation openings clear,
and do not install the inverter in a compartment with limited airflow.
Explosive Gas Precautions
1. Batteries generate explosive gases during normal operation. Be sure
you follow all relevant instructions exactly before installing or using
your inverter.
2. This equipment contains components which tend to produce arcs or
sparks. To prevent fire or explosion, do not install the inverter in
compartments containing batteries or flammable materials or in
locations that require ignition-protected equipment. This includes any
space containing gasoline-powered machinery, fuel tanks, as well as
joints, fittings, or other connections between components of the fuel
system.
FCC Information to the User
This Class B device complies with Part 15 of the FCC Rules and all
requirements of the Canadian Interference-Causing Equipment
Regulations. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.