Filter
Top Products
4
Audio interface manual
Audio interface and control surface
Functions of the audio interface and control surface
This section explains how to connect the unit with a computer and how to set up and
use the audio interface and control surface functions of the
with a DAW and other
software.
Control surface functions
Control surface functions can be used
to control DAW software on a computer
via USB. Transport operations, including
playback, recording and stopping, and
physical control of the DAW faders are
possible. Furthermore, various other DAW
software functions can be mapped to the
F1~F5 keys (assignable functions depend
on the DAW used).
DAW software
Cubase LE, etc.
Windows/Mac
USB Cable
PHONES jack
Playback device like
headphones or an
audio system
OUTPUT jacks
Stereo system,
speakers with built-in
amplifiers, etc.
INPUT jacks
Guitars and other
musical instruments,
built-in stereo mic
Audio driver
ププププププププ
Audio interface
The inputs and outputs can be used
as a Hi-Speed USB 2.0 audio interface
with 2 inputs and 2 outputs at quality
up to 24-bit/96kHz. Effects can be used
when the sampling rate is 44.1 kHz, and
the unit can be powered by a computer’s
USB bus.