Integrated Cleaner Operation
A40-039 Rev 1 Page 17
4.11 Turning Degas On and Off
Note: Degas cannot be started if SONICS are on.
• Press the SELECT OPTION Switch until the LED next to “SET DEGAS min” lights. The
current Degas setpoint is displayed in Digital Number Display.
• Press ON/OFF to toggle Degas on. Degas will operate for the set time. The display will count
down the time remaining on the Digital Number Display.
• When the timer times out, the ultrasonics will turn off and the display will show the Degas set
time.
4.11.1 Interrupting Degas
• Press ON/OFF to toggle Degas off before the set time has expired. The display will
show the set time.
• If ON/OFF is pressed again, Degas will resume from where it was stopped and the
display will show the time remaining.
4.11.2 Resetting time during degassing
• Press ON/OFF to toggle Degas off before the set time has expired.
• Press the SELECT OPTION switch until the “SET DEGAS min” LED lights.
• To increase time, press the SET DISPLAY switch until the desired setting is
displayed.
• To decrease time, press the CLEAR DISPLAY switch then press the SET DISPLAY
switch until the desired setting is displayed.
4.12 Setting Ultrasonic Time
• Press the SELECT OPTION Switch until the LED next to “SET SONICS min” lights. The
current setpoint is displayed in Digital Number Display.
• Press CLEAR DISPLAY switch to set the time to 0.
• Repeatedly press SET DISPLAY to set the desired Sonics time between 01 and 99 minutes.
4.13 Turning Ultrasonics On and Off
Note: Ultrasonics cannot be started if Degas is on.
• Press the SELECT OPTION Switch until the LED next to “SET SONICS min” lights. The
current setpoint is displayed in Digital Number Display.
• Press ON/OFF to toggle Sonics on. The ultrasonics will operate for the set time. The display
will count down the time remaining on the Digital Number Display.
• When the timer times out, the ultrasonics will turn off and the display will show the sonics set
time.
4.13.1 Interrupting the ultrasonics
• Press ON/OFF to toggle sonics off before the set time has expired. The display will
show the set time.
• If ON/OFF is pressed again, the sonics function will resume from where it was
stopped and the display will show the time remaining.
4.13.2 Resetting time during cleaning
• Press ON/OFF to toggle sonics off before the set time has expired.
• Press the SELECT OPTION switch until the “SET SONICS min” LED lights.
• To increase time, press the SET DISPLAY switch until the desired setting is
displayed.
