Configuring IPv6 647
Configuring OSPFv3 Area Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• OSPFv3 Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 10-14. OSPFv3 Area Configuration Commands
CLI Command Description
area default-cost Configures the monetary default cost for the stub area.
area nssa Configures the specified areaid to function as an NSSA.
area nssa default-info-originate Configures the metric value and type for the default route advertised
into the NSSA.
area nssa no-redistribute Configures the NSSA ABR so that learned external routes will not be
redistributed to the NSSA.
area nssa no-summary Configures the NSSA so that summary LSAs are not advertised into
the NSSA.
area nssa translator-role Configures the translator role of the NSSA.
area nssa translator-stab-intv Configures the translator stability interval of the NSSA.
area stub Creates a stub area for the specified area ID.
area stub no-summary Disables the import of Summary LSAs for the stub area identified by
areaid.
show ipv6 ospf area Displays information about the area.
