A SERVICE OF

logo

710 Configuring Quality of Service
The queue is configured, and the device is updated.
Displaying Interface Queue Settings
1.
Open the
Interface Queue Configuration
page.
2.
Click
Show All
.
The
Interface Queue Status
page displays.
3.
Select
Unit / Port
,
LAG
, or
Global
.
Figure 11-20. Interface Queue Status
Configuring an Interface Queue Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
QoS Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 11-10. Interface Queue Configuration Commands
CLI Command Description
cos-queue min-bandwidth Specifies the minimum transmission bandwidth for each interface
queue.
cos-queue strict Activates the strict priority scheduler mode for each specified queue.