A SERVICE OF

logo

720 Configuring IP Multicast
Multicast Route Table
Use the Multicast Route Table page is used to display MRoute data.
To display the page, click IPv4 Multicast
Multicast
Multicast Route Table or IPv6 Multicast
Multicast
Multicast Route Table.
Figure 12-3. Multicast Route Table
The Multicast Route Table page contains the following fields:
Group IP
— The destination group IP address.
Source IP
— The IP address of the multicast packet source that, combined with the Group IP,
identifies an multicast route table entry.
Incoming Interface
— The incoming interface on which multicast packets for this source/group arrive.
Table 12-2. Multicast Interface Configuration Commands
CLI Command Description
ip multicast ttl-threshold Applies a
ttlvalue
to a routing interface.
show ip mcast interface Displays the multicast information for the specified interface.