xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
287
DGS-3324SRi:4#enable dnsr cache
Command: enable dnsr cache
Success.
DGS-3324SRi:4#
Example Usage:
To enable static table lookup for DNS relay.
DGS-3324SRi:4#enable dnsr static
Command: enable dnsr static
Success.
DGS-3324SRi:4#
disable dnsr
Purpose Used to disable DNS relay on the Switch.
Syntax
disable dnsr {cache | static}
Description
This command is used, in combination with the enable dnsr
command above, to enable and disable DNS Relay on the Switch.
Parameters cache – This parameter will allow the user to disable the cache
lookup for the DNS rely on the Switch.
static – This parameter will allow the user to disable the static
table lookup for the DNS rely on the Switch.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable status of DNS relay.
DGS-3324SRi:4#disable dnsr
Command: disable dnsr
Success.
DGS-3324SRi:4#
Example Usage:
To disable cache lookup for DNS relay.
