xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
288
DGS-3324SRi:4#disable dnsr cache
Command: disable dnsr cache
Success.
DGS-3324SRi:4#
Example Usage:
To disable static table lookup for DNS relay.
DGS-3324SRi:4#disable dnsr static
Command: disable dnsr static
Success.
DGS-3324SRi:4#
show dnsr
Purpose Used to display the current DNS relay status.
Syntax
show dnsr {static}
Description This command is used to display the current DNS relay status.
Parameters
static − Allows the display of only the static entries into the DNS
relay table. If this parameter is omitted, the entire DNS relay table
will be displayed.
Restrictions None.
Example Usage:
To display DNS relay status:
DGS-3324SRi:4#show dnsr
Command: show dnsr
DNSR Status : Disabled
Primary Name Server : 0.0.0.0
Secondary Name Server : 0.0.0.0
DNSR Cache Status : Disabled
DNSR Static Cache Table Status : Disabled
DNS Relay Static Table
Domain Name IP Address
-------------------------------------- ---------------
www.123.com.tw 10.12.12.123
bbs.ntu.edu.tw 140.112.1.23
Total Entries: 2
DGS-3324SRi:4#
