Table 1-1 Server Dimensions
ValueDimensions
2URack units
8.6 cm (3.4 in.)Height
48.3 cm (19.0 in.)Width
67.9 cm (26.8 in.)Depth
17.5 kg (38.6 lb.)
22.2 kg (49.0 lb.)
Weight
• Minimum
• Maximum
Server Components
The server consists of the following components:
Processor
• 1.4 GHz/12 MB L3 cache dual-core processor
• 1.6 GHz/18 MB L3 cache dual-core processor
Memory
• 12 memory DIMM slots
• 256 MB, 512 MB, 1 GB, 2 GB, and 4 GB standard 184 pins 2.5 V DDR1, CL2, registered, ECC
• 133 MHz memory bus frequency, 266 M transfers/s data, 8.5 Gb/s peak data bandwidth
• Minimum memory size of 1 GB with four 256 MB DIMMs
• Maximum memory size of 32 GB with eight 4 GB DIMMs
• Upgrades must be made by quads of DIMMs
• DIMMs loaded by quads enable interleaved mode and chip spare
PCI Riser
• Four independent PCI-X 133 MHz 64 bit, 3.3 V, 15 W slots. There is no 5 V card or hot-plug
support.
NOTE: Some 25 W cards are supported. See the Server I/O Slot Matrix on the HP website athttp://
www.hp.com
For more information regarding specific I/O cards, see http://www.docs.hp.com/en/netcom.html
Internal Core I/O
• Dual channel SCSI U320 interface, two internal 68-pin connectors, one 68-pin external
connector
• Three internal SCSI drive 80-pin type connectors that provide drive electrical hot-plug
capability
• One internal IDE connector for a slim-line optical device (CD and DVD)
External Core I/O
• One SCSI U320 68 pin connector
• Two 10/100/1000Base-T Ethernet LAN connectors for twisted-pair cable
• Four USB 2.0 ports
• Two general purpose or 9-pin serial ports, 16550 compatible
20 Introduction
