Applications
64
Language Setting
Let you specify the language you want to use.
The function of the button and the GUI (graphical user
interface) are the same as the [Language Selection] window
that is displayed when the recorder is first switched on.
When setting the language, shut down the VR-N900 Viewer.
1 Select [Language Setting] in the Main Menu.
• The [VR-N900 Language Selection] window is displayed
when the VR-N900U is switched on for the first time. Click
the [?] button and select the language you want to use in
the [VR-N900 Language Selection].
• Click the [OK] button to enable your choice. The system
will reboot when the language setting is changed.
• Click the [Cancel] button to cancel.
CAUTION
• As for language setting, immediately set the language
after the VR-N900U startup.
• When language setting is finished, the device
automatically reboots. Approximately 5 minutes is
required to finish.
• Set the language after shutting down the Viewer.
• Never turn off the power while setting the language.
Image Server Setting
Lets you specify settings for connecting the VR-N900U to a
computer and for displaying the [Live Viewing] window and
[Browse] window.
CAUTION
• The Image Server settings apply to operations in the [Live
Viewing] window, [Browse] window and [Screen Setup]
window on the VR-N900U.
1 Select [Image Server Setting] in the Main Menu.
This will open the [ImageServer Administrator] window.
The [ImageServer Administrator] window is divided into five
sections.
● Server Configuration Section
This section is used for specifying the server name and port
and for enabling optional external access to the server.
Name:
Lets you specify a name for the server. By default, the
name is simply [Server].
Port:
Lets you specify a port number to use for the server.
Enable Outside Access:
Select this check box to enable access to the VR-N900U
from a surveillance computer connected to the internet via
router or firewall.
If this option is selected, specify the global IP address in
the [IP address] column of the router or firewall for
Internet, then specify the port number in the [Port] column
to have the surveillance computer access to the internet.
[VR-N900 Language Selection] window
[ImageServer Administrator] window
