A SERVICE OF

logo

Barcode Manipulation 137
E-EQ-VX3XRG-G VX3X Reference Guide
COM Port Tabs
Access: Start | Settings | Control Panel | Scanner | COM1 or COM2 or COM3
Do not connect a tethered scanner to the USB labeled ports:
COM1, COM2 and COM3 Panel Options are Identical.
Figure 4-3 Scanner Control / COM Port Tab
Adjust the settings and tap the OK box to save the changes. The changes take effect immediately.
The COM 1 tab contains the same parameters as the COM 2 and COM 3 Tab. “Power on Pin 9”
on the COM 2 panel is disabled. Adjust the settings and tap the OK box to save the changes. The
changes take effect immediately.