LXE E-EQ-VX3XRG-G Manual

A SERVICE OF

next previous

External Connectors 39

E-EQ-VX3XRG-G VX3X Reference Guide

Programmable Keys

Figure 2-11 Programmable Keys

There are two keys, one on each side of the display. The keys can be programmed to perform

specific functions. The programmable keys have no effect on barcode scanners tethered to the

device. Both buttons default to disabled (with the exception of IBM 5250 terminal emulation

devices – in this case, the left button is labeled and functions as “Field Exit”).

Note: The programmable Scan key is the Field Exit key when the VX3X is an IBM 5250

compatible device.

To edit the button parameters, select Start | Settings | Control Panel | KeyPad. Change the

parameter values and tap OK to save the changes.

Field Exit Key Function (IBM 5250 Only)

The Field Exit key is used to exit an input field. If the field is an Auto Enter field, the

auto transmit function is activated. This key function is present on the IBM 5250 specific

keypad only.