PRV-9000 Operating Instructions
2 CONNECTION OPTIONS
Become familiar the rear panel of the PRV-9000 before connecting other components.
1 - AC IN (power inlet)
2 - Component Video Out (BNC ports)
to a TV or monitor with Component Video In
3 - S-Video Output 1 (S-Video port)
to a TV ,monitor, AV receiver or other equipment with S-Video Input
4 - Video Output 2 (BNC port)
to a TV ,monitor, AV receiver or other equipment with composite Video Input
5 - Video Input 1 (S-Video port)
to record from a camcorder, VCR or other equipment with a S-Video output
6 - Video Input 2/AUTO REC* (BNC port)
to record from a camcorder, VCR or other equipment with a composite video output
7 - Digital Out Optical
to an AV receiver, Dolby Digital/DTS decoder or other equipment with Optical Digital Input
8 - Digital Out Coaxial (RCA pin)
to an AV receiver, Dolby Digital/DTS decoder or other equipment with Coaxial Digital Input
9 - Signal Gnd
recorder may fail under certain environmental conditions (excessive noise)
terminal is a ground for when multiple devices cause signal interference but is NOT a safe
grounding terminal
10 - VHF/UHF In (F-type)
from TV antenna
11 - VHF/UHF Out (F-type)
signal from the VHF/UHF In to the TV/monitor
12 - Control In/Out (monaural mini jacks)
to other Pioneer equipment for unified remote operation
13 - Audio Input 1, 2/AUTO REC* (RCA pins)
to record from a camcorder, VCR, satellite receiver or other equipment
14 - Audio Output 1, 2 (RCA pins)
to the audio inputs of a TV, monitor, AV receiver or other equipment
Note: AUTO REC detects a signal at the Video Input 2 port but fails if a video signal is absent.
10
