PRV-9000 Operating Instructions
primary screen action
To play DVD-Video discs on a standard television, follow the directions below.
1. Press SETUP to access the menu.
2. Highlight Initial Setup from the main menu.
Use the joystick to highlight the option.
3. Press ENTER to confirm your selection.
4. Highlight Video from the Initial Setup menu by using the joystick.
5. Select TV Screen Size from the Video menu by using the joystick.
Options appear to the right with the current setting marked (square).
Note: For more screen size and setting information, refer to Chapter 11:
ADDITIONAL INFORMATION, section 11.5 Screen Sizes & Disc Formats,
6. Choose the aspect ratio to match the setting of the TV or monitor.
๎ 4:3 Letterbox (Standard)
๎ 4:3 Pan & Scan (Standard)
๎ 16:9 Wide (Widescreen)
7. Press SETUP to exit the Setup menu.
8. Press STANDBY/ON to change the recorder to the standby mode.
9. Press STANDBY/ON again to power ON the recorder.
4.1.3 Set the Digital Audio Output
When operating the PRV-9000 with an AV amplifier/receiver for full surround
sound, set the recorder to output digital audio signals that match the receiver.
If you are unsure of the required signals, refer to the ownerโs manual for the
AV amplifier/receiver.
27
