Chapter 16 Remote Management
P-870HN-51D User’s Guide
194
16.4 The Service Control Screen
Click Advanced > Remote MGMT > Service Control to open the following
screen. Use this screen to decide what services you may use to access which P-
870HN-51D interface.
Figure 98 Service Control
The following table describes the fields in this screen.
Table 73 Access Control: Services
LABEL DESCRIPTION
Service Control Select Enable to turn on service control. Otherwise, select Disable.
# This is the index number of the entry.
Services This is the service you may use to access the P-870HN-51D.
LAN Select the Enable check box for the corresponding services that you
want to allow access to the P-870HN-51D from the LAN.
WAN Select the Enable check box for the corresponding services that you
want to allow access to the P-870HN-51D from the WAN.
Apply Click this button to save your changes back to the P-870HN-51D.
