Chapter 21 Logs
P-870HN-51D User’s Guide
225
To change your P-870HN-51D’s log settings, click Maintenance > Logs > Log
Settings. The screen appears as shown.
Figure 127 Maintenance > Logs > Log Settings
The following table describes the fields in this screen.
Table 87 Maintenance > Logs > Log Settings
LABEL DESCRIPTION
Active Select to enable or disable system logging.
Log Level Select the severity level of the logs that you want the P-870HN-51D to
display, record and send to the log server.
The P-870HN-51D displays and records the logs with the severity level
equal to or higher than what you selected.
Mode Select Local to record the logs and store them in the local memory of the
P-870HN-51D only.
Select Remote to send logs to the specified log server.
Select Both to record the logs and store them in the local memory and
also send logs to the log server.
Syslog Server
IP Address
Enter the server name or the IP address of the log server.
Syslog Server
UDP Port
Enter the UDP port of the log server.
Apply Click Apply to save your customized settings.
