A SERVICE OF

logo

Open as PDF
next previous
Chapter 2 Tutorials
P-870HN-51D User’s Guide
42
This tutorial uses the following example IP settings:
To configure a static route to route traffic from N1 to N2:
1 Log into the P-870HN-51D’s Web Configurator in advanced mode.
2 Click Advanced > Static Route.
3 Click Add to add a new rule in the Static Route screen.
4 Configure the Static Route Setup screen using the following settings:
4a Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination
(N2).
4b Select the WAN interface to which the rule applies. This example uses the
default WAN interface.
4c Select Gateway Address and type 192.168.1.253 (R’s N1 address) in the
Gateway IP Address field.
4a Click Apply.
Table 2 IP Settings in this Tutorial
DEVICE / COMPUTER IP ADDRESS
The P-870HN-51D’s WAN 172.16.1.1
The P-870HN-51D’s LAN 192.168.1.1
A 192.168.1.34
R’s N1 192.168.1.253
R’s N2 192.168.10.2
B 192.168.10.33