Chapter 5 WAN Setup
P-870HN-51D User’s Guide
79
IPoE
This screen displays when you select IP over Ethernet in the WAN Service
Configuration screen.
Figure 34 WAN Configuration: IPoE
Bridge PPPoE
Frames Between
WAN and Local
Ports
Select this option to forward PPPoE packets from the WAN port to the
LAN ports and from the LAN ports to the WAN port.
In addition to the P-870HN-51D's built-in PPPoE client, you can select
this to allow up to ten hosts on the LAN to use PPPoE client software
on their computers to connect to the ISP via the P-870HN-51D. Each
host can have a separate account and a public WAN IP address.
This is an alternative to NAT for application where NAT is not
appropriate.
Clear this if you do not need to allow hosts on the LAN to use PPPoE
client software on their computers to connect to the ISP.
Enable IGMP
Multicast Proxy
Select this check box to have the P-870HN-51D act as an IGMP proxy
on this connection. This allows the P-870HN-51D to get subscribing
information and maintain a joined member list for each multicast
group. It can reduce multicast traffic significantly.
Back Click this button to return to the previous screen.
Next Click this button to continue.
Table 17 WAN Configuration: PPPoE
LABEL DESCRIPTION
