Filter
Top Products
78-8130-6741-6 Rev G 15
Step 14. Populate as many fields as possible from
the drop-down list of common (compressed)
terms available to conserve marker memory
space, or choose UserEdit if a term is not
found to meet the user's requirements. Select
term by pressing the up/down arrows [SK]
and press Locate/OK [5].
Step 15. Navigate to the next field by pressing the
left/right arrow [SK].
Step 16. Press Modify [SK] to populate the
highlighted field.
Step 17. Populate additional fields, as needed,
using the above procedure steps 15 and 16.
Templates are limited to six Label and six
Description fields (256 bits of data total).
Step 18. When the template is complete, save the
template by pressing Locate/OK [5].
B. Editing Templates
The operator can select an existing template and
make changes to it in the same manner described in
5.A. Creating New Templates. The following save
screen will appear.
Over Write: Saves all modifications that have been made to the original template.
Rename: Overwrites the old template with the new name and all modifications. Display
will return to the template name field. Modify the name of the template and press
Locate/OK [5] to save.