Filter
Top Products
78-8130-6741-6 Rev G 19
− [SK2] X-Type: Choose ‘Yes’ if writing to
a Gen 2 marker and ‘No’ if writing to a
Gen 1 marker. Gen 2 markers will have
an “X” following the serial number that
is printed on the attached tag.
− [SK3] Marker: Select type of marker to
be written by repeatedly pressing Marker
[SK Toggle].
− [SK4] Lock/Unlocked: Press [SK4] to
toggle between locking and unlocking
the marker. The default setting is
unlocked and note that a locked unit
cannot be modified once locked. If the
marker will be locked then a verification
screen will appear to ensure that the
marker is locked intentionally.
Step 3. Press Menu/OK
The selected template will be displayed.
The arrow on the right side of the display
indicates there is more information than can
be displayed on the screen (scroll down by
pressing the down arrow [SK]).
Step 4. Press the up/down arrows [SK] to highlight
the information to change.
Step 5. Press Modify [SK]. The percentage
displayed in the upper right portion of the
display indicates the remaining memory
available on the marker.
Step 6. The operator may select User Edit in order
to ‘type’ the modification, or Delete Row to
remove the entire row from the template, or
select Show All to display a list of common
compressed terms.
Note: Using a common compressed term requires
less memory in the marker.
Step 7. Select an option from the list by pressing the
up/down arrows [SK]. Press Locate/OK [5].