Asus A7V133 Marine Radio User Manual


 
10
ASUS A7V133 Users Manual
2. FEATURES
Performance
2. FEATURES
2.1.2 Special Features
ACPI Ready: Advanced Configuration Power Interface (ACPI) provides more
Energy Saving Features for operating systems that support OS Direct Power
Management (OSPM) functions. With these features implemented in the OS,
PCs can be ready around the clock, yet satisfy all the energy saving standards.
To maximize functions, an ACPI-supported OS, like Windows 98 must be used.
Easy Installation: Incorporates BIOS that supports autodetection of hard disk
drives, PS/2 mouse, and Plug and Play devices to make the setup of hard disk
drives, expansion cards, and other devices virtually automatic.
Suspend and Go: Suspend-to-RAM (STR) provides maximum power savings
as an alternative to leaving the computer ON and QuickStart so that you do
not have to wait for a long time for system bootup.
New Compliancy: Both the BIOS and hardware levels of this motherboard meet
the stringent requirements for PC 99 certification The new PC 99 requirements
for systems and components are based on the following high-level goals: Sup-
port for Plug and Play compatibility and power management for configuring
and managing all system components, and 32-bit device drivers and installation
procedures for Windows 98/ME/2000/NT. Color-coded connectors and descrip-
tive icons make identification easy as required by PC 99.
Symbios SCSI BIOS: Supports optional ASUS SCSI controller cards through
the onboard SYMBIOS firmware.
Onboard AC97 Audio Controller: (optional) Supports advanced automated
audio performance. (See 4.4.2: I/O Device Configuration in BIOS setup).
2.1.3 Performance Features
Concurrent PCI: Concurrent PCI allows multiple PCI transfers from PCI mas-
ter busses to the memory and processor.
High-Speed Data Transfer Interface: IDE transfers using UltraDMA/100 Bus
Master IDE can handle rates up to 100MB/s. This motherboard with its chipset
and support for UltraDMA/100 increases the data transfer rate to 100MB/s.
UltraDMA/100 is backward compatible with DMA/66, DMA/33, and DMA and
with existing DMA devices and systems so there is no need to upgrade current
EIDE/IDE drives and host systems. (UltraDMA/66 and UltraDMA/100 require
a 40-pin 80-conductor cable to be enabled.)
VCM/SDRAM Optimized Performance: This motherboard supports a new gen-
eration memory, NECs 64Mb Virtual Channel Memory (VCM) Synchronous Dy-
namic Random Access Memory (SDRAM), which is compatible with the industry
standard SDRAM. The VCMs core design provides up to 50% higher SDRAM
speed at reduced power consumption of about 30%. This motherboard also supports
standard SDRAM, which increases the data transfer rate (1.064GB/s max using
PC133-compliant SDRAMs and 800MB/s max using PC100-compliant SDRAMs).