87
5. SOFTWARE SETUP
ASUS A7V133 User’s Manual
5. S/W SETUP
Windows 98
1. Install the first and second hard disk into the hard disk bays of your system.
Connect each hard disk drive with a separate UltraDMA/100 cable, one to the
Primary ATA/100 IDE connector and the other to the Secondary ATA/100 IDE
connector onboard the A7V133.
2. Ensure that ATA/100 / RAID 0 jumpers 13 and 14 are both covered: [2-3]
(See: Section 3.4.5, Hardware Setup: Motherboard Settings)
3. Connect the power cables to the hard disks.
5.4.3 Creating the RAID 0 Array
1. Boot-up your computer. If this is the first time you have booted with two hard
disks correctly installed, then the Promise® BIOS displays this screen:
2. Press <Ctrl-F> keys to display the FastBuild™ Utility Main Menu:
5.4.2 Installing the Hard Disks
The RAID 0 system allows users to configure two new hard disks with the same
new OS simultaneously.