Filter
Top Products
3. Display installation
3.2 Cover removal
To remove the c onnector compartment cover
1. Loosen the screw fixing the connector compartment cover.
2. Slide the cover downwards to remove it from the display.
1
2 2
Image 3-2
3.3 Video input connecti on
About video input connections
The MDSC-2226 can have multiple different video inputs connected (depending on t he display version).
Switching between the different inputs can be easily done by pressing the direct access key for this. See
the dedicated section for more info.
Futhermore, if more than one video source is connected, the Picture in Picture (PiP) and Side-by-Side
(SbS) functionality becomes available, allowing you to view two different video inputs at once. Please
refer to the dedicated chapter for more info on how to activate and use the PiP and SbS features on your
MDSC-2226.
This chapter describes how to connect t he different video input types for each version of the MDSC-2226.
3.3.1 MDSC-2226 LED version
To connect the video inputs
1. Connect one or more of the available video source(s) to the corresponding video inputs using the ap-
propriate video cable(s).
4 5 6 7 8
1
2 3
9
Image 3-3
DVI or VGA (*)
4
DisplayPort
5
16 (451920610993)K5903021 MDSC-2226 01/03/2013