Filter
Top Products
3. Display installation
3.4.3 MDSC-2226 MNA version
To connect the video o utputs
1. Connect one or more of the available video sink(s) to the co rresponding video outputs using the appro-
priate video cable(s).
3
1 2
Image 3-8
CVBS
1
S-Video
2
DVI
3
(tobeconfiguredinOSDmenu)
Nexxis
3
(tobeconfiguredinOSDmenu)
3.5 Nexxis OR
Overview
Connecting your MDS C-2226 to Barco’s Nexxis OR system allows you to distribute video, graphics, au dio
and computer data over the IP network, in r aw uncompressed format, inside the operating room and even
between surgical suites.
To connect your MDSC-2226 to Barco’s Nexxis OR system, connect the 10Gb Ethernet interface to your
Nexxis switch. More info a bout Nexxis OR and how to configure the MDSC-2226 in your network is avail-
able in the dedicated user guides. Please visit m
y.barco.com to obtain these user guides.
Nexxis OR is only available on the MDSC-2226 MNA version.
3.6 Power supp ly connection
To connect the power supply
1. Connect the supplied external DC power supply unit to the +24 VDC power input of your MDSC-2226
display.
20
(451920610993)K5903021 MDSC-2226 01/03/2013