Filter
Top Products
Resource Prerequisites
• Create a FCoE VLAN
interface vlan <VLAN ID> [Create
VLAN for FCoE]
exit
• Create FCoE Map
fcoe-map default_full_fabric
fabric-id <FCoE VLAN ID> vlan <FCoE
VLAN Id>
fc-map <FC MAP>
exit
• Apply FCoE MAP to interface
interface fibrechannel 0/0
fabric default_full_fabric
no shutdown
NOTE: Below is the process of generating
the FC MAP
For generating the fc-map use below ruby
code.
Here VLAN ID is FCoE VLAN ID
fc_map =
vlanid.to_i.to_s(16).upcase[0..1]
fc_map.length == 1 ? fc_map =
"0EFC0#{fc_map}" : fc_map =
"0EFC#{fc_map}"
Brocade
Alias needs to be created having Compellent fault
domain WWPN accessible on Brocade switch.
Compellent
Nothing specific for ASM
Prerequisites for Rack Server, S5000, Brocade and Compellent
The following table describes the prerequisites for the FCoE solution offered using Rack Server, S5000,
Brocade and Compellent. For more information, see http://en.community.dell.com/techcenter/extras/m/
white_papers/20387203
Resource Prerequisites
S5000 • DCB needs to be enabled.
• VLT needs to be disabled.
• Enable Fibre Channel capability and Full Fabric
mode.
feature fc
15