Unied Access Point Administrator’s Guide
Unied Access Point Administrator’s Guide
Page 103
March 2012
Section 8 - Conguring Client Quality of Service (QoS)
RADIUS
Attribute
ID Description Type/Range
Vendor-Specic (26),
LVL7-Wireless-Client-
ACL-Up
6132,121 Access list identier to be applied to 802.1X authenticated
wireless client trafc in the inbound (up) direction.
If this attribute refers to an ACL that does not exist on the AP, all
packets for this client will be dropped until the ACL is dened.
Type: string
5-36 characters (not null-terminated)
The string is of the form “type:name”
where: type = ACL type identier:
IPV4, IPV6, MAC
: = required separator character
name = 1-31 alphanumeric characters,
specifying the ACL number (IPV4) or
name (IPV6, MAC)
Vendor-Specic (26),
LVL7-Wireless-Client-
Policy-Dn
6132,122 Name of DiffServ policy to be applied to 802.1X authenticated
wireless client trafc in the outbound (down) direction.
If this attribute refers to a policy name that does not exist on the
AP, all packets for this client will be dropped until the DiffServ
policy is dened.
Type: string
1-31 characters (not null-terminated)
Vendor-Specic (26),
LVL7-Wireless-Client-
Policy-Up
6132,123 Name of DiffServ policy to be applied to 802.1X authenticated
wireless client trafc in the inbound (up) direction.
If this attribute refers to a policy name that does not exist on the
AP, all packets for this client will be dropped until the DiffServ
policy is dened.
Type: string
1-31 characters (not null-terminated)
Table 57 - Client QoS RADIUS Attributes