Filter
Top Products
157
New Trail
To manually start a new trail in the Trails Menu, make sure
NEW TRAIL
is selected and press ENT. You will be directed to the Edit Trail screen.
Trail Visible/Invisible and Other Trail Options
The name, active and visible settings and maximum number of points
in the trail, all are accessed on the Edit Trail menu. The Active setting
determines whether or not the unit is recording new points for a par-
ticular trail. On the Edit Trail menu, press ↓ ↑ to highlight the section
you want to change, then press
ENT. Make your changes, then press
EXIT to close this menu.
Units of Measure
This menu sets the units of measure used for Speed and Distance,
Depth, Temperature, Altitude and Heading.
To change units of measure:
Press
MENU|MENU|↓ to SYSTEM SETUP|ENT|ENT.
Units of Measure on System Setup menu (left).
Units of Measure Menu (right).
To set Units of Measure: Press ↓ to the desired units, then press ENT
to turn a unit on or off. After all options are set, press EXIT|EXIT to re-
turn to the main page display.