Filter
Top Products
129
4. Press ← ↓ to
DISTANCE|ENT. Press ↑ ↓ to change the first character,
then press → to the next character and repeat until the distance is cor-
rect. Press
ENT.
5. Press ↓ to
BEARING|ENT. Press ↑ ↓ to change the first character, then
press → to the next character and repeat until the bearing is correct.
Press
ENT.
6. Press ↑ to
PROJECT|ENT. The Edit Waypoint menu appears. Press
EXIT|EXIT to get back to the main page display or press EXIT|ENT to
navigate to the new waypoint.