Filter
Top Products
90
The Satellite Status Page has its own menu, which is used for setting
various options. To access the Satellite Status Page Menu, from the
Status Page, press
MENU.
Navigation Page
This screen has a compass rose that not only shows your direction of
travel, but also the direction to a recalled waypoint. To get to the Navi-
gation Page press
PAGES|← → to NAVIGATION|EXIT.
The navigation screen looks like the one below when you are not navi-
gating to a waypoint or following a route or trail. Your position is
shown by an arrow in the center of the screen. Your trail history is il-
lustrated by the line extending from the arrow. The arrow pointing
down at the top of the compass rose indicates the current direction of
travel (track).
Traveling north and recording a trail on the Navigation page. The
page looks like this when the unit is not navigating to a waypoint, fol-
lowing a route or backtracking a trail.
When navigating to a waypoint, the Navigation screen looks like the
following figure. Your ground speed, track, distance, bearing to way-
point and course are shown digitally on the screen.
NOTE:
Remember: when Speed, Track and Position information displays
are flashing, satellite lock has not been achieved and no position fix
has been determined. A question mark will flash on the present po-
sition arrow in the center of the compass rose.
Compass
rose
Navigation
information
displays in
customizable
data boxes
Present
position
arrow
Trail line
Track or compass heading indicator, showing direction of travel