Filter
Top Products
12. The main display appears. The outputs and alarms (if an alarm board is present) are assigned to default values.
13. To change outputs, alarms, and other settings go to the main menu and choose Program. Follow the prompts. A
menu tree is on the following two pages. To calibrate the sensor(s) refer to section 6.0.
Temp Units
o
C
o
F
S1 Manual pH
7.00
0
S1 Free Cl
pH Correction
Manual
Live/Continous
Live/Continous
9. Choose Live/Continuous. Go to step 11.
10. The screen shown at left appears only if you have an FCL-01. Enter the
pH of the process liquid.
11. Choose the desired temperature units.