Filter
Top Products
DANIEL™ SERIES 1500 TURBINE METER OCT 2013
Pressure/Temperature Carbon Steel Stainless Steel
SPECIFICATIONS
2-3
600 ANSI / -20 to 100°F (-29° to 82°C)
1480 psig WP 1440 psig WP
600# ANSI / 180°F (82°C)
1376 psig WP 1248 psig WP
600# ANSI / 400°F (204°C)
1270 psig WP 995 psig WP
900# ANSI / -20 to 100°F (-29° to 82°C)
2220 psig WP 2160 psig WP
900# ANSI / 180°F (82°C)
2064 psig WP 1872 psig WP
900# ANSI / 400°F (204°C)
1900 psig WP 1490 psig WP
1500# ANSI / -20° to 100°F (-29° to 82°C)
3705 psig WP 3600 psig WP
1500# ANSI / 180°F (82°C)
3457 psig WP 3196 psig WP
1500# ANSI / 400°F (204°C)
3170 psig WP 2570 psig WP
Pressure
ANSI pressure/temperature rating corresponding to flanges used
Pressure Drop
four psi (34.5 kPa) at maximum flow rate (based on water -
meter only)
Ambient Temperature
-40 to 140/F (-40° to 60/C) (T
amb
is an electrical specification)
CS flange minimum temperature is -20/F (-29/C)
Process Temperature
-20° to 180° F (-29° to 82°C)
Optional Process
Temperature
-20° to 400° F (-29° to 204°C), ATEX -29° to 200°C