Filter
Top Products
OCT 2013 DANIEL™ SERIES 1500 TURBINE METER
INSTALLATION3-2
3.3 Installation and Equipment
Figure 3-1, Typical Installation, has been provided as a guide in establishing optimum performance
of the meter. Prior to installation, consider the general information listed below.
Figure 3-1. Typical Installation
1. Note the direction of flow indicated on the plate near the inlet flange and install accordingly.
2. New Installations - Lines should be flushed thoroughly to rid piping of potentially damaging
foreign material such as welding bead, pipe scale, etc. before the meter is placed into service.
A spool piece installed in place of the meter is recommended for this procedure.