Filter
Top Products
DANIEL CUI INSTALLATION INSTRUCTIONS 9
DANIEL CUI
MAR 2008 Installing a Direct Connection Driver
3.2.2 Instructions for Windows Vista™
1. From the task bar at the bottom of the screen click on the Start button
and select Control Panel.
2. Now, double-click on the icon
Phone and Modems Options.
3. The Phone and Modems Options displays. Select the Modems tab.
Make sure there are not any modem drivers installed for the COM
port for which you plan to install the direct connection driver. This is
necessary due to a limitation in the Microsoft® Dial-up Networking
that will prevent it from working correctly if multiple drivers are
assigned to the same COM port.
To delete any drivers, select them and click
Remove. Then click on the
Add button to start the installation wizard.
Figure 3-9 Modem Properties Dialog
4. Windows Vista™ may display a message Windows needs your
permission to continue. Select Continue to proceed.