Filter
Top Products
DANIEL CUI INSTALLATION INSTRUCTIONS 3
DANIEL CUI
MAR 2008 Installing Daniel CUI
3. DANIEL CUI INSTALLATION INSTRUCTIONS
3.1 Installing Daniel CUI
Perform the following steps to install Daniel CUI:
1. Make sure you have Administrative rights before proceeding. If you
are not sure, continue and the installation program will inform you if
you don’t and abort the installation.
2. Insert the CD in the appropriate drive.
IMPORTANT MESSAGE FOR USERS OF Windows® 2000
SERVICE PACK 4 AND MARK III METERS!
Windows
® 2000 Service Pack 4 has a problem that will prevent Daniel CUI from
connecting or cause Daniel CUI to crash when attempting a direct serial or modem
connection to a Daniel Mark III Gas Ultrasonic Meter or a Daniel Liquid Ultrasonic
Meter. This is a known Issue documented in the Microsoft Knowledge Base Article
824301 "Script Error" Error Message When You Try to Connect to a Server by Using
a Remote Access Connection. A Hotfix is available from Microsoft. Please see
Section 3.2.4 below on where to find this patch. It is necessary to address this issue
if you intend to communicate with a Daniel Mark III Gas Ultrasonic Meter or a Daniel
Liquid Ultrasonic Meter with Daniel CUI using a serial port or modem. If you are only
communicating to a meter using Ethernet, then it is not necessary to take any action
on this issue. This issue does not affect communications to Daniel Mark II Gas
Ultrasonic Meters.