Filter
Top Products
DANIEL CUI INSTALLATION INSTRUCTIONS 5
DANIEL CUI
MAR 2008 Installing a Direct Connection Driver
3.2 Installing a Direct Connection Driver
For Daniel Mark III Gas Ultrasonic Meter or a Daniel Liquid Ultrasonic
Meter
Perform the following steps to install the Daniel Direct Connection driver
in order for Daniel CUI to communicate with a Daniel Mark III Gas
Ultrasonic Meter or a Daniel Liquid Ultrasonic Meter using a serial port.
This process and driver to install varies slightly for the different
operating systems.
3.2.1 Instructions for Windows® XP or Windows® 2000
The dialogs included in this section are from Windows® XP. The written
instructions will point out differences for Windows® 2000.
1. From the task bar at the bottom of the screen click the Start button.
Use the Settings>Control Panel menu path for Windows® 2000 or
Control Panel for Windows® XP.
2. For Windows® XP only, if the Control Panel looks like the dialog
below, click the Printers and Other Hardware icon.
Figure 3-2 Windows® XP Control Panel
3. Now, double-click the icon Phone and Modem.
4. The Phone and Modems Options displays. Select the Modems tab.
Make sure there are not any modem drivers installed for the COM
port for which you plan to install the direct connection driver.