Filter
Top Products
1. INSTALLATION
1-7
11. Press the RETURN soft key. Note the depth seabed.
30
°C
20
10
15
0
10
5
0.0
SNDR
FUNC
MODE/
FREQ
SHIFT
GAIN
RANGE
GPS 3D
50kHz
10.2
SOUNDER
Video sounder picture
If the bottom is displayed in reddish brown and the depth indication appears the mounting
location is suitable. You can leave the transducer in position.
If the bottom is not displayed in reddish brown, the mounting location is unsuitable.
Relocate the transducer and do the following.
1. Press the [POWER] key to turn off the power.
2. Gently dismount the transducer with piece of wood.
3. Do steps 1 through 5 in the previous procedure. Repeat until a suitable location is found.
Final preparation
Support the transducer with a piece of wood to keep it in place while it is drying. Let the
transducer dry 24 – 72 hours.