Filter
Top Products
1. INSTALLATION
1-18
Attaching the sensor to the bracket
1. If the retaining cover near the top of the bracket is closed, open it by depressing the
latch and rotating the cover downward.
Step 1
Step 4
Step 3
Step 2
Latch
Retaining
cover
Pivot
arm (2)
Slot (2)
Attaching the sensor to the bracket
2. Insert the sensor’s pivot arms into the slots near the top of the bracket.
3. Maintain pressure until the pivot arms click into place.
4. Rotate the sensor downward until the bottom snaps into the bracket.
5. Close the retaining cover to prevent the accidental release of the sensor when the boat
is underway.